Connecting the PXI6608 to the BNC2110

[JJJJeb]

Hi all,

I am trying to use the PXI6608 to generate precise pulses. Is it possible to connect the PXI6608 to the BNC2110? I have both, and I am using the cable RS6868 to make the connection. However, the power light indicator is not lighting. Does anybody have an idea about the problem?

Thank you,

JJJJeb

[Dane.S]

Hi JJJJeb,

I think you may find this page very helpful!

Cable and Accessory Guide for 66xx devices:

https://www.ni.com/en/support/documentation/cable-accessory-guide/daq-multifunction-i-o-cable-access...

From this page we can see that the 6608 looks like it works with the BNC-2121 and not the BNC-2110

[JJJJeb]

Hi Dane,

Actually, I bought the PXI6608 and the BNC2110 as a recommendation from a NI engineer.

I realized it is possible to feed the BNC with 5 V from an external source. However, that is not convenient.

In a simple way, I would like to generate a very precise pulse in time in order to control a FET relay. The problem is the PXI6608 manual presents too many concepts that I am not familiar with. So, I have a simple application, and it seems to PXI6608 is really useful for that. However, I do not know how to start. Do you have any recommendation in this regard?

JJJJeb

[Dane.S]

For getting started you may consider looking at digital output and counter output examples that are included in DAQmx. 

There is an article about where to find examples:

https://www.ni.com/en/support/documentation/supplemental/18/ni-daqmx-example-locations-for-labview-a...

[JJJJeb]

Thanks.

I will check this out.

JJJJeb