Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

How to control AC Source GW APS7100 using GPIB

Solved!
Go to solution

Hi there,

 

i want to control APS71000 using GPIB but there is no labview example provided, can anyone help me on this problem. I want to set an output voltage, measure power and measure current.

0 Kudos
Message 1 of 3
(1,423 Views)
Solution
Accepted by topic author Muhaimi

I was able to find a shipping example.

santo_13_0-1596921908149.png

VI Tree present in the LVProj

santo_13_1-1596922076101.png

 

 

(downloaded the driver from https://www.gwinstek.com/en-global/products/downloadSeriesDownNew/14888/562)

In any case, please refer the below image for a simple program,

GW_APS7100.png


Please note, I am associated with neither NI nor GW and I provide this code as per my understanding, it is expected that you take this code as a reference and debug with your hardware.

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
Message 2 of 3
(1,369 Views)

Hi Santosh,

Thanks for the example, now I able to control and do the measurement. 

 

Capture.PNG

0 Kudos
Message 3 of 3
(1,344 Views)