05-04-2017 08:47 AM
Hello,
My lab has a Chromex spectrometer 250 is/im coupled to a Hamamatsu photomultiplier. Unfortunately the documents and softwares relative to these devices were lost.
Notes from a previous user speak about a Labview software to control the IRSPECTRA.
Does anybody have the same monochromator and could share his software or indicate a way to buy it?
If not, does anybody have a Labview program to control this monochromator or at least the GPIB instructions to do it?
Thanks in advance!
Solved! Go to Solution.
05-04-2017 11:00 AM
Is this company still in business? It was very hard to find info online...
This manual includes some chromex commands starting on page 102 that might be useful, but you'll probably be guessing a lot to find out how to format the commands.
This thread shows how to use one of the commands.
<forums.ni.com/t5/facebookforums/facebooksingletopicpage/facebook-app/417075545007603/message-uid/1059964/tab/board/page/176>
05-04-2017 11:39 AM
Thank you very much Gregoryj, it is better than nothing.
According to this page https://business.highbeam.com/138838/article-1G1-114248707/bruker-optics-inc the Chromex company has been acquired by Bruker Optics which explains the difficulties to find info.
05-24-2017 06:51 AM
Finally, I had help from Hamamatsu in Italy and DAWOOL ATTONICS in Seoul.
They sent me the Chromex manual which give the GPIB functions used by the device. Therefore I am now able to control the spectrometer via Labview. The problem is solved.
06-30-2018 03:28 AM
Please connect with DAWOOL ATTONICS CO., LTD.
Good Luck!
12-16-2019 02:18 AM
Hello,
I have the same problem. We have a Chromex 250 IS spectrometer, but all the software has been lost. Since we want to control the monochromator with LabView as well, do you have still have the GBIP functions used by the device or even would like to share the LabView porgram that you programmed a couple of years ago?
Kind regards
Tobi
01-23-2020 07:00 AM
I am facing a similar issue with the same Chromex instrument. Could you send a copy of the manual?
10-07-2021 02:38 PM
Did you ever get a copy of the manual. I could use one also. Please send to me if you have it.
03-08-2022 01:11 PM
Hi,
Did you get the manual? If you did, will you be able to send it to me, too? Thanks. I appreciate it.
-jeremy-
03-31-2023 07:54 AM
Hello,
I have one of these spectrographs, too. I cannot establish communication with it. Can you provide me information on how to establish communication? I have a manual, but the device is not answering any commands I am sending.
Thank you very much!