Could I use ni6723 to generate square signal?

[qcy]

I just want to use the AO port of NI6723 to generate square signal with frequency between 10kHz to 500khz. The duty cycle should be 50%. The maximum voltage will be 10V and I want to change the minmium voltage between 0V to 5V.Is that possible?Could you give me an example?Thanks a lot!

Best regards!

Ciyuan Qiu

[moderator1983]

For generating periodic waveform, you can look for Regeneration mode. Topic like Glitching might be of interest to you.

Try below example.

DAQmx AO Regeneration - Dynamically Updating User Buffer Data