Hello, Im using the USB 6009 to collect my data. After a 6 month pause, When I ran my VIA diaglogue box that said "loading lvlib" popped up before the VI opened.When I run the VI I get a "error 201003" (Image 3) (It was working perfectly fine before) - The only change was the upgrade from windows 8.1 to windows 10. (My Labview Interface with adurino seems to work fine) I looked at the following links to for information - 1. http://www.ni.com/white-paper/52818/en/2. http://www.ni.com/download/ni-daqmx-15.5.1/6100/en/3. http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du,n8:3.1637,ssnav:sup/ I updated my NI DAQmx drivers, but get the same error. When I look at devices and inetrfaces - the status says "not present" (Image 1) - after updating the driver, the "ASRL 10::INSTR LPT1" status also says "not present" (Image 2) When I test the device alone - It checks out. I'm a little confused as to what to do next? Should I rollback to windows 8 ? Should I re-install the USB 6009?? Am I missing something??Any help would be great. Thanks

Thank you for attaching your VI and providing additional information. Here are some facts that might clarify things for you.The only version of LabVIEW that is certified for Windows 10 is LabVIEW 2015. LabVIEW 2012 was released 3 years before Windows 10, and is not certified to run on this OS.If the USB-6009 is working properly with LabVIEW, when you plug it in, MAX (Measurement and Automation eXplorer) should "wake up" and offer to configure it for you. If you don't have MAX on your desktop, then you definitely will not be able to run your VI. If you do have MAX, you should be able to open it, see your USB-6009, open test panels for it, and manually set it to acquire data on an analog channel. Try Continuous Sampling at 1 KHz, 1000 points -- you should see a "noisy" plot changing once per second.Assuming that my assumption that you are trying to run your code on a PC running Windows 10 is correct, I think you have two options:Start over with a PC running Windows 7 x64 (consider re-imaging your Windows 10 PC, if necessary), then reinstalling LabVIEW 2012 (32-bit).Continue with the Windows 10 PC, but install LabVIEW 2015, including (from Device Drivers) DAQmx.Looking forward to learning more about your system, including (a) if my assumptions are correct, (b) which path you chose to try to get this working, and (c) what happened. Bob Schor

LabVIEW

Error 201003 - USB 6009

Solved!

Author

Hey Alex,

That makes sense - Thank you. No I was refering to the LIFA (This one I think - http://www.ni.com/gate/gb/GB_EVALTLKTLVARDIO/US)

But my DAQ assistant works now - One of the issues was that, after I updated the drivers, I didnt delete the old assistant. But when I did that - it works just like before.

Lana

Message 11 of 12

(943 Views)

Author

Hey Bob -

One issue was that I didnt delet the DAQ assiatnt - but did that, and now it works.

Thank you for all the help! I did get the 2015 and the associated drivers none the less - just to stay updated.

Lana

Message 12 of 12

(942 Views)

What do you need our team of experts to assist you with?

Request a quote Find the right product Place an order Get support on a product

How can we help?

Please enter your information below and we'll be intouch soon.

This field is required

Preferred communication method

Email Phone call

What do you need our team of experts to assist you with?

Request a quote Find the right product Place an order Get support on a product

LabVIEW

Error 201003 - USB 6009

Re: Error 201003 - USB 6009

Re: Error 201003 - USB 6009