LabVIEW
Error messages
NO. How does that match up to the state machine that we discussed earlier? Why have you still refused to bring those states out of your subvi into your main vi? Each of those frames in your subvi would represent a state in your state machine. You do not want a separate state for each position. Go to position is the same for each, with only the input differing. I outlined a basic state flow for you here . You may need other states (a wait state, for instance). This outline will work for 1 to infinity (well, maybe not quite infinity, but you get the point) number of positions.
Have you followed the directions from the messages? Have you taken advantage of the free training resources? You are not going to understand the comments when you don’t have a basic LabVIEW understanding. You have been told multiple times what to do, but you have failed to show any attempt to do what you were told,
For clarity sake I will repeat.
1. Make a state machine.
2. Outside the state machine make an array of your positions.
3. Add a shift register initialized to zero.
4. Wire the shift register through all states but 1. In that 1 state you will decide whether to increment your counter. If you increment were it through with a +1. Otherwise wire it through.
5. Have a state to stop if there are no more elements in your position array.
