I am getting this data on serial moniter of arduino..
Real_Power=3874.44 Apparent_Power=3774.76 PowerFactor=1.03 Supply_Voltage=353.91353.91 Current=10.67
Real_Power=3876.42 Apparent_Power=3776.56 PowerFactor=1.03 Supply_Voltage=353.80353.80 Current=10.67
by running this code
#include "EmonLib.h" // Include Emon Library
EnergyMonitor emon1; // Create an instance
void setup()
{
Serial.begin(9600);
emon1.voltage(5,172,2.3); // Voltage: input pin, calibration, phase_shift
emon1.current(1,5); // Current: input pin, calibration.
}
void loop()
{
emon1.calcVI(20,2000); // Calculate all. No.of wavelengths, time-out
pinMode(7,OUTPUT);
//emon1.serialprint(); // Print out all variables
float realPower = emon1.realPower; //extract Real Power into variable
float apparentPower = emon1.apparentPower; //extract Apparent Power into variable
float powerFActor = emon1.powerFactor; //extract Power Factor into Variable*/
float supplyVoltage = emon1.Vrms; //extract Vrms into Variable
float Irms = emon1.Irms;
Serial.print("Real_Power=");
Serial.print(realPower);
Serial.print(" Apparent_Power=");
Serial.print(apparentPower);
Serial.print(" PowerFactor=");
Serial.print(powerFActor);
Serial.print(" Supply_Voltage=");
if (supplyVoltage<5)
{
Serial.print(0);
}
else
{
Serial.print(supplyVoltage);
}
Serial.print(supplyVoltage);
Serial.print(" Current=");
Serial.print(Irms);
Serial.println();
delay(1000);
}
I want to send this data to lab view and plot its graphs on lab view
