Dear community!
I try to create a measurement for the Keysight DAQ973A with a DAQM900A measurement card.
My system:
- Win 11
- LabView 2020SP1
- IVI Shared components V3
- KtDAQ970 IVI-C Driver V1
- DAQ connection with either USB or Ethernet
- Used both US and German Windows System Language
My goal:
I want to create a program, where i can modify the aperture and range of two canals for a dc measurement. I want 1 measurement value for each of the two channels in one cycle.
Important: I do not want to use the AUTO features
With multiple different attempts I tried to realize this measurement.
I have attached one VI what i think should be the most accurate one working.
Sidenote 1: I want to read the aperture and range due to the fact, that prior with other VIs some settings where overruled.
Sidenote 2: Example 1 from the drivers package is not working at my setup, but example 2 is.
Sidenote 3: I was able to program a setup for a 4 and 2 wire measurement before with the same driver and setup.
My best guess is, that it has something to do with some interpretation of characters to the machine.
Do you folks have any idea how to resolve this?
My Error with the attached VI:
Error Code: BFFA4214
Keysight DAQ970.lvlib:IVI Error Converter.vi<ERR>
I/O error. Timeout ist vor Vervollständigung der Operation abgelaufen.
<b>Complete call chain:</b>
Keysight DAQ970.lvlib:IVI Error Converter.vi
Keysight DAQ970.lvlib:Scan Read.vi
kdaq sequence.vit
