Labview question

[lsnavy]

Develop a VI that computes the pressure as a function of temperature for an ideal gas: 𝑃 = 𝑚𝑅/𝑉 (𝑇), which is 𝑚𝑅/𝑉 = 𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡 = 10 𝑘𝑃𝑎/𝐾 Use a Numeric Control for temperature in kelvin (input), but use a Meter or Gauge to display the pressure in kPa (output). Numeric Control for temperature, Meter o Gauge for Pressure. How would I start this in labview? Thanks!

[crossrulz · Accepted solution]

As the problem states, start with a numeric input for the temperature and a guage indicator for the pressure.  After that, you just need to multiply the temperature by 10 to get your pressure.

If you are stuggling with this, I highly recommend you go through some of the tutorials

3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products

Spoiler

Hey Hooovahh, those links are in a macro

[lsnavy]

Thanks!

[Hooovahh]

---

@crossrulz wrote:

Spoiler

Hey Hooovahh, those links are in a macro

---

I didn't forget.