Hi,
I was using labview 8.5 and windows vista 32bits and all was working fine. Then i had a little problem with my laptop and needed to formatt it. Since I own a legit copy of windows 7 pro and I am planning on adding more RAM up to 4 GB, I decided to install Windows 7 64 bits.
Since it seems like that only Labview 2009 has support for 64 bits OS, I decided to install the Labview 2009 64 bits evaluation version.
Then I installed NI-488 drivers for my GPIB to USB converter, so I can access my tektronix scope remotely.
For last, I installed NI-VISA 4.6.
In MAX, everything is ok and the device is detected through GPIB-0. The only problem is that every time I try to run my circuit, it gives me the error:
LabVIEW: (Hex 0xBFFF009E) VISA or a code library required by VISA could not be located or loaded. This is usually due to a required driver not being installed on the system.
=========================
VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded.
Already tried to reinstall or change the installation order for NI-VISA 4.6 and NI-488 drivers, but it is the same. I also tried some fixes like renaming visa32.dll and visa64.dll and then repairing NI-VISA drivers, but nothing works.
I really cannot remember if I was using VISA 4.2 before. Do you think this could be the problem?
Thanks for your help.
Message Edited by Phobia on 09-17-2009 03:46 PM
