NI-MAX CmxExecutionThreadPool::DoWorkNonUI Error

[hormel13]

I just performed a fresh install of labview 8.5.1, NI-MAX 4.8.0f0 and NI-DAQmx Device Driver 9.3.0f2

When I launch NI-MAX I get an error that says "The exception occurred in the NIMAX process in the function CmxExecutionThreadPool::DoWorkNonUI Error."

I've tried to force reinstall the software using the method outlined here

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YGwJCAW&l=en-US

This did not resolve the issue.  I've installed this same set of NI software before without this issue and I don't know what is going on this time.  Does anyone know how to resolve this issue.  I've attached a screen shot of the error

[Misbahd]

Hey! this KB has some additional things you can try like disabling the anti-virus

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019MV8SAM&l=en-US

I'd also try to upgrade your drivers to the latest version you can use. See the compatibility info below.

https://www.ni.com/en/support/documentation/compatibility/17/labview-and-microsoft-windows-compatibi...

.https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kHJgSAM&l=en-US

https://www.ni.com/en/support/documentation/compatibility/16/ni-daqmx-and-labview-compatibility.html