Nut threading inspection

[rk_t]

Hello everyone,

I have a application in which I want to inspect a M6 size hole for threading. 

It is a simple 'go/no go' system to check if threading is present or not. No need for the quality of threading, pitch, etc

Is this possible in Labview using a USB camera or something? If yes, can anyone give me some idea?

Thanks. I appreciate your help.

[PalanivelThiruvenkadam · Accepted solution]

yes its possible!

Need the following NI Software

Vision Aquisition Module (VAS)

Vision Developement Module

IMAQ dx Module

Learn More About NI VISION

https://decibel.ni.com/content/docs/DOC-46492

[rk_t]

Thank you very much for your reply.

One more question: what are the other requirements for a vision system? Lighting? etc

[udka]

There are multiple things you need to consider:
-Camera, Light, Test Object, Test Environment, Software, Part Presentation etc..
Start reading here: http://zone.ni.com/reference/en-XX/help/370281AC-01/TOC1.htm
and this http://zone.ni.com/reference/en-XX/help/370281AC-01/TOC32.htm

Edit: There is separate board for Machine vision specific questions here: https://forums.ni.com/t5/Machine-Vision/bd-p/200