hello friends,I have the UMD 98 meter and need to access it via a fixed IP address. I have fixed registers that I need to read out. in the registers are "Word" with 2 bytes each. a total of 4 bytes corresponding to "Float 32". the two float values need to be converted so that I can display the voltage. I can't find my problem. Can someone help me with this. i am attaching the VI.

Okay I took the time to track down a manual and skimmed it... BTW: I suggest you study this manual very closely Uln1 base address is 1100h Uln2 base address is 1102h Uln3 base address is 1104h That means each measurement uses two registers. Now if I were going to get all three voltage measurements at the same time. I would read all six registers at once (start at 1100h and set the number of registers to read to 6). That would then output a U16 array of six elements. Index the elements and convert them using the combine and convert VI I gave you.