The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target.

[Eng.Tareq]

Hi,
i got this problem when i want to deploy the project with softmotion 
https://www.dropbox.com/s/at9r9w667i00qja/qqqqqq.png

NI SoftMotion:  The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target. 

[TuiTui]

Hi Eng.Tareq

It would be better if you can give more information

1. What is the software version are you using?

2. What is your target hardware?

You can check the above information by open MAX -> under software tab of both computer and you target

I suspect that the software version of your host computer and the target is difference as state in the picture attached.

TuiTui

[Eng.Tareq]

i donno how to check these things ?
can i have any guide ?

[TuiTui]

Hi Eng.Tareq,

To check the software version, You need to open MAX and go under software drop down list.

Best regards,

TuiTui

[Eng.Tareq]

2. What is your target hardware?


how can i check this
the software is 2010

[TuiTui]

Hi Eng.Tareq

In MAX, under your target there should be a software drop down for you as well

TuiTui

[Eng.Tareq]

https://www.dropbox.com/s/4l6spsnhkxrxyls/eeeeeeeeeeeeeeeeeeeeeeeeee.png

i have this

[TuiTui]

Hi Eng.Tareq,

Can you tell me what is your RT target? as i don't see any hardware that you are using.

TuiTui

[Eng.Tareq]

Hi,
how can i know the RT target ?

[TuiTui]

Hi Eng.Tareq,

You have said that you deployed you program. What is the hardware you deploy to?

TuiTui