Is the PCI-6220 compatable with windows 7 64 bit

[asdfasdfasdgsdf]

dfdfbgdgdfggrergfergre

[crossrulz]

The drivers are 32-bit, but you can run it on a 64-bit machine.

[asdfasdfasdgsdf]

What driver file do I use?  No luck with NI-DAQmx Device Driver 9.8

[Dennis_Knutson]

According to your other posts, it is recognized. Your tasks and scales are not. Big difference. Your tasks and scales could be referring to a different device. Perhaps you created them for dev2 and on the new pc it is dev1.

[asdfasdfasdgsdf]

The tasks and scales were created during the import and reference the "Simulated" PCI-6220.  If I "Reset Configuration Data" to delete my import, I still see the "recognized" PCI-6220.  In addtion, I do not see the SCXI-1000 attached to the PCI-6220 or any sensors attached there to.  If I try to create a task, it get "No Ssupported devices found"

[asdfasdfasdgsdf]

In addtion, no menu appears when the device is right clicked.

[asdfasdfasdgsdf]

No options for the device

[SkyWalka]

Was the device installed in the computer before DAQmx was installed?  If so, it may be best to:

1) Turn off PC to remove PCI card

2) Uninstall DAQmx (Programs and Features >> Add or Remove Programs >> National Instruments)

3) Restart computer, reinstall DAQmx

4) Turn off PC, install 6220 card

[NEWKlear]

You will have to create the SCXI chassis in MAX to get it to appear.  From here you will be able to create tasks.

start at step ten here: http://www.ni.com/pdf/manuals/373236m.pdf