Creating triggers from Labview FPGA to timing module NI PXIe 6674T in Flexrio

[aish_2489]

Hi all,
I have created a program in Labview FPGA to start a counter everytime the
trigger button is enabled as shown in the attached file.
I want to send a trigger signal to the PFI 3 slot of the NI PXIe 6674 timing
module embedded in the NI PXIe 1075 chassis such that it triggers the Keysight arbitrary waveform generator to transmit a waveform.

As I am new to labview fpgaam not able to figure this out.

Any help would be appreciated

Thanks

Aishwarya

NI Software :  LabVIEW FPGA Module  version 2012 SP1
NI Hardware :  PXIe-1075 device

[FinchTrain]

Hi,

A great starting point would be the following tutorial:

Designing Custom Triggering Applications With the LabVIEW FPGA Module

https://www.ni.com/en/support/documentation/supplemental/21/designing-custom-triggering-applications...

Regards,

Finch Train