I am using Tek MSO/DPO4034 with USB Communciation and Labview 8.2.1 Instrument Driver.
I am getting an error with I talk to scope more than twice. I have 10 separate tests. If I run them individually, I am ok.
If I run them as together in sequence. I get this failure Status: 0xBFFF0015 (VI_ERROR_TMO) most of the time. I will pass once in a while.
I use the same setup each scope use. I change the meaurement type & timebase value.
| > VISA Write ("USB0::0x0699::0x0401::C021220::INSTR", "VERB OFF;") | Process ID: 0x00000FB0 Thread ID: 0x00000FDC | Start Time: 10:48:24.751 Call Duration 00:00:02.016 | Status: 0xBFFF0015 (VI_ERROR_TMO) |
I tried putting delay time of .2 to .5 sec between scope setup. No success.
Capture file is from NI Spy.
Any help would be appreciated.
Thanks,
Greg
Greg
