Frankonia FC 02 antenna mast and turntable controller

[Dennis_Knutson]

When you tried to install NI-VISA, isn't there an option to install just .NET support. It's been a while since I did this but I thought this was an option.

[yoppy]

Hi ku_ku,

Currently, I am also interested to create my own app to control the turn table and antenna mast of FC02

Did you manage to dechiper the commands?

I would be more than happy if you would like to share the codes.

Thanks in advance.

[ku_ku]

I've done this so far ago.... couple of vi. Give a note if this is not enough, I'll ran to \lab an copy it from test PC- where it is still runing.

[Kodester]

Hi Ku_ku,

According to the official discussion rules (rule #3 in the link below) you shouldn't post to old discussions, but instead create your own new post. This helps you, since new posts are more likely to be seen and get answered. Please make a new post for your controller question

Forum rules: http://forums.ni.com/t5/Getting-Started-on-the-NI/NI-Discussion-Forums-User-Guidelines/td-p/3164638

[ku_ku]

OK, rules are rules... nothing to complain.... 🙂