Hello everyone,
My problem might be either software or hardware, it’s not really clear yet, feel free to move my post in the appropriate section.
Until recently, I used a NI-PXIe 1082 with a couple of NI devices (NI 6368 & NI 2527). Communication between the devices and the computer has always been smooth. The entire system was recently moved (unplug-pack-move-unpack-plug). There has been no shock or damage done to the system whatsoever, however it does not work anymore since this transport (it may have nothing to do with it, but this is too big of a coincidence…). The OS is windows 10 32 bits. Labview version is 15.
Symptoms:
NI-max: Does not start. NI-max is stuck at the “loading plugins” step. If I wait long enough (>1h), NI-max does start but is not responding and must be closed.
Labview: Can’t initialize the communication with either of the devices I used to use. Returns an unspecified error #-2147220719.
What I have tried so far:
Pretty much everything I could find online… especially https://forums.ni.com/t5/Multifunction-DAQ/NI-MAX-stuck-at-load-plugins/td-p/1102284.
Restart NI configuration Manager using Microsoft’s Service app: The restart does not go through. It gives me the error 1053 (couldn’t stop the service because of a time out).
All help is appreciated,
Thanks
