NI_VISA USB RAW Mode for Window 10

[sj1993]

Following the instruction below to config my instrument to "USB RAW Mode" , it does not seems to work on Windows 10 machine. 

I was able to have the process working on Windows 7 Machine both 32 bit and 64 bit. 

Any tricks?

Thanks

Shu

http://www.ni.com/tutorial/4478/en/

[RandallCrandall'sCandleHandle]

Hi sj1993,

Which version of the VISA drivers are you using? Also, what behavior are you seeing that seems like it's not working?

Cheers,

Ryan

[sj1993]

Ryan,

I have tried a few different rev of Visa driver - including the latest on NI web

What works, the device shows up as USB device and on NI max.  When not working, device not appear on NI-Max

SJ

[RandallCrandall'sCandleHandle]

Hi SJ,

If you're seeing the device disconnecting randomly, try using a different USB port. It's especially useful to use the USB ports on the back of your PC if you're using a desktop. It also might be useful to use a powered USB hub to maintain your connection. This article gives some more information about the subject:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019MucSAE&l=en-US

Cheers,

Ryan