control via Ethernet

[star-123]

Hi Everybody,

An instrument which has LAN input was connected the internet and was seen in the MAX. When I opened the test panel in the MAX, error was given. VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error. How can I overcome the error? Also, in the test panel, transmit buffer and receive buffer are zero. Do the buffers have to be zero?

Thank you.

[thuyanhl]

Hi,

Did you follow these instructions to set up your device in NI-MAX? 

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x3gXCAQ&l=en-US