Labview 2019: No connection with Arduino Mega 2560

[Maass]

Hello,

want to start a communication between new installed Labview 2019 and Arduino 2560.

But it will not work. Only the RX-LED on Arduino is blinking for 30 seconds.

All required settings are done properly.

1. LIFA-Base (Labview Interface for Arduino)  is installed 

2. Com-Port is set correctly

Is there something I forgot...?

I would be thankful for a little help !!!

best regards

Christoph

[mollaee.saeed]

Can you please indicate what interface you are using? are you using LINX?

I could not find the Arduino interface and the LINX for Labview 2019? it does not appear in the NI package manager

[Maass]

Hello,

as I wrote I use the LIFA-Base (Labview 2019  32 Bit) coming with the VI-Package Manager

and the Arduino IDE v1.8.9 .

Next I want to try Labview 2018 and perhaps an older Arduino IDE....

[SINC]

Hi Maass, please see my thread:

https://forums.ni.com/t5/LabVIEW/LabVIEW-Tutorials-Programming-an-Arduino-using-LINX/m-p/3959118#M11...

I have posted several videos on how to program an Arduino using LabVIEW and the LINX add-on. The only variation will be you would have to select the Arduino 2560 in the LINX firmware wizard (see tutorial 1). 

Please let me know if you have any questions.