Baumer Camera not connect to cRIO

[Himanshu.sharma]

Hello Guys,

I am trying to connect my gigaE camera from Baumer with cRIO 9022 via ethernet port but I can not discover the camera in MAX. I also tried to connect the camera directly to PC and it works fine. I checked for the IMAQdx drivers on my cRIO and they are properly installed. 

Secondly, I also tried to connect to the USB port of cRIO (with ethernet to USB 3 converter) but still I can not see the camera in my MAX device list.

Please suggest some possible solution.

[HeinzG.]

Hi,

have you checked if the camera and cRIOs second ethernet port have propper IP settings e.g. are in the same subnet?

Kind regards

Heinz

[Himanshu.sharma]

Hello ,

Yes, I checked this as well. but cRIO and Camera are in same subnet.

Regards,

Himanshu Sharma

[HeinzG.]

Hi,

are you sure your setup should work since the controller is rather old? 

This KB states:

"GigE Vision
Cameras following the GigE Vision standard are supported by high-performance, multi-core cRIO devices, such as the cRIO-908x and cRIO-903x series.  There are currently no sbRIO targets that support GigE Vision cameras."

If it is an IP camera then try this link:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x4IqCAI&l=en-US

But it seems there are only Basler and AXis cameras supported...

[Himanshu.sharma]

Hello,

Yes, I consider this as a compatibilty issue between camera and cRIO type. 

Thank you

Regards,

Himanshu