@Theopolis wrote:
Never asked you to teach me LabView just wanted better clarification of the VISA functions. You're last post wasn't much helpful at all; thanks for at least trying to help, however, your last response is useless. I appreciate the attempt.
Seriously? You don't need clarification you need to learn LabVIEW basics as VISA functions are the backbone of almost all LabVIEW comunications.
But here are the two or three VISA VI's you need to learn about for your project.
VISA Configure Serial Port http://zone.ni.com/reference/en-XX/help/371361M-01/lvinstio/visa_configure_serial_port/
VISA Read http://zone.ni.com/reference/en-XX/help/371361M-01/lvinstio/visa_read/
VISa Write http://zone.ni.com/reference/en-XX/help/371361M-01/lvinstio/visa_write/
========================
=== Engineer Ambiguously ===
========================
