Build Error. LV 2011

[Alfares]

Hello,

I have a systematic error when I try to build a .exe from my proj.

The error message I receive is this:

-------------------------------------

The VI is broken. Open the VI in LabVIEW and fix the errors.
D:\Xenteo Reader Crypto Nailbed\Analog check\Main.vi<Call Chain>Error 1003 occurred at AB_Targetfile.lvclass:Open_Top_Level_VIs.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Page_Preview.vi
Possible reason(s):
LabVIEW:  The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select File>>Open to open the VI and then verify that you are able to run it.

-----------------------------------------

It appears like some subVI is broken or not functional but when I run it everything seems OK. 

Any idea I can overcome this issue?

In attach the full project with the related subVI

[ThiCop · Accepted solution]

Hello Alfares,

Have you already tried the steps described in the following document?

http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02

[Alfares]

thank for the suggestion. 

I follow the doc and I fixed the prob.

[Ryan_Griffin]

I've got another really interesting build error in this category. It's pretty specific, but maybe this can help someone else. I'm build a project around the Actor Framework and one of my actors has a Picture control on the FP. It works fine in the development environment, and the executable that calls the specific instance of the Actor builds fine UNLESS I load some image data into the picture control and save the result as the default for the control. I get a 1003 error:

Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:

Error 1003 occurred at AB_Targetfile.lvclass:Open_Top_Level_VIs.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller

Possible reason(s):

LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select File>>Open to open the VI and then verify that you are able to run it.

Delete the picture control, add a blank one and DON'T save the value to default and it builds fine again. Hm. 

[ThiCop]

Hello Ryan,

I have some things you can try:

- Please go to the Advanced section of your application's Properties.

- Does unchecking Disconnect type definitions and remove unused polymorphic VI instances resolve the issue?

- Does enabling Debugging in this section ("Advanced") fix the issue?

My first "guess" would be that the first option is the culprit (depending on the usage of polymorphic VI instances)

[Ryan_Griffin]

ThiCop,

I had already worked through the previous suggestions, including the Application Properties settings, individual VI settings (debugging, inline, etc.), class-private-data-with-class-VI-reference craziness, etc. to no avail.

My application is building fine again, but at any point I can break it by loading some non-empty image data, right-clicking the image control on one of my actor's front panels » Data Operations » Make Current Value Default, and saving the VI. I can then fix the issue by deleting the image control and dropping one without a non-empty default value (rewiring it appropriately).

Thanks for the suggestions, though...

-Ryan