CDAQ-9133 with Windows

[Qaiser]

I have noticed that there is not much information available that helps me start making VIs for cDAQ 9133 with windows installed.

I have experience with cDAQ RT but not with cDAQ windows. I just switched on the cDAQ for the first time and it shows there is no space left!!!

How can I create VIs if there is no space in the controller? Is there a way to manage the space? 

[setupatel]

Hi Qaiser,

Have you taken a look at our article on freeing up space on your cDAQ Controller? I linked it below!

How Can I Free up Some Storage Space in My cDAQ Controller?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kFyhSAE&l=en-US

Let us know if this fixed your issue! 

[Qaiser]

Hi Setu,

Unfortunately there is no folder by that name in C. But there was a folder by the name of IMAGES which had drivers (Installers) for the Chipset, Graphics,Network, USB3 which I removed from C drive. This gave me 480 MB to work with.

[setupatel · Accepted solution]

Hi Qaiser,

The issue her is that the embedded controllers are designed for deploying applications and not as development systems.

The best practice is to install the Run-Time engines on your cRIO-9133 for the software you are trying to use, develop your VIs on a different machine, and then deploy the application on your controller. The article linked below is where is where I found these suggestions:

---- Link ----

Memory is Full on my Embedded cDAQ Controller

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kJ3aSAE&l=en-US

----

Keep us posted on your progress!

[Qaiser]

Thanks Setu.