GPIB ISSUE

[Pandurangaummiti]

Iam unable to detect instruments with GPIB Interface in LABVIEW MAX

Pls help me

[santo_13]

Few checks,

1. Ensure cable is seated correctly in the connector of the instrument and the GPIB card
2. Check if the instrument has a setting or switch to work in remote mode
3. Check if the instrument is expected to respond to *IDN? query
4. Check if the instrument requires additional GPIB configuration

What instrument are you using and what do you exactly mean by "unable to detect"?

[Pandurangaummiti]

Tq for reply. .

But not useful. ..

Thanks for your help 

[Eric1977]

Well...you've given us very little to go on...we'd need more information to help you solve your issue.

[ben64]

Make sure you have NI-488.2 installed.

Ben64

[Jay14159265]

---

@Pandurangaummiti wrote:

Tq for reply. .

But not useful. ..

Thanks for your help 

---

did you try yelling at your computer and maybe roughing up the keyboard a bit? 

[Eric1977]

---

@Jay14159265 wrote:

---

did you try yelling at your computer and maybe roughing up the keyboard a bit? 

---

😂 😂

[billko]

---

@Jay14159265 wrote:

---

@Pandurangaummiti wrote:

Tq for reply. .

But not useful. ..

Thanks for your help 

---

did you try yelling at your computer and maybe roughing up the keyboard a bit? 

---

I always say I won't help my colleagues until they've tried that first.  Usually they already have.

[Pandurangaummiti]

Good reply...

Thank you...

[Jay14159265]

---

@Pandurangaummiti wrote:

Good reply...

Thank you...

---

You could mark it as a solution if it helped : ) 

If not, please post more info and we can find a solution.