Have LabVIEW VIs been developed for use with the Omicron CM Engine dll? It is the software interface to the CMC-256 hardware, a 3-phase voltage and current source.

[Doug C]

Hello Del,

I looked on Omicron's Site and they have not made an instrument driver for this as well as NI does not have a instrument driver posted. LabVIEW does allow you to talk to a dll through the call library node. Here is a link to get you started:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/a6705fec7ea42300862567b70054206e?OpenDocument
I hope this helps.
Doug

[Hobbe]

Where did you find that omicron CM engine dll??? i can´t find it anywhere..:(

[Hobbe]

...and have you done a controller vi in LabVIEW for Omicron CMC-256? or you perhaps know where to find it??

[kwan]

hii,

Where you able to solve the problem as I am facing the same problem, Can you help me....

[Charles.Tac]

Hi All,

Here comes up with a new LabVIEW PnP driver for CMC-256. Hope it is not too late to help your projects.

http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=19083

[SPN2]

Can somebody help me with link where I can download LabVIEW driver for OMICRON CMC256 Cm-Engin.

Thanks in advance 

[rolfk]

In the last message in this thread, before you revived it after 11 years, is a link to a driver that you can download. It is not using ghe Engine.dll but instead directly communicating through TCP/IP with the device but that has the advantage that all is fully in LabVIEW VIs and not hidden inside a DLL. Much easier to debug your application and less chance to crash your program.