Re : Re: I am looking for some information on ELAN protocol for Siemens analyzers and also some information on AK protocol for California Analytical Analyzers. Mainly I need a starting point to communicate with these devices for labview.

[maartenvb]

Dave,

You are right, m.vanblijderveen should be replaced by m.blijderveen. Thanks for your reply!

Maarten

[DavidBoyd]

Maarten,

OK, just tried again.  Please let me know that you received it.

Dave

[Geert_W]

Hello Dave,

I’m also very interested in your ELAN VI’s. We have just ordered at Siemens a 4th Ultramat6E analyzer for CO/CO2 measurement together with an USB/RS485 converter. We have used up to now the analog output of the Ultramat for data acquisition. I have the USB/RS485 working now with the free SIPROM software however I want to have it integrated in our LabVIEW environment just as it was with the analog output. It should be very nice if I can run your VI’s to achieve this. Siemens has delivered the W&T 36201 USB/RS485 converter.

Thanks in advance & best regards,

Geert Wever

geertDOTweverAThoneywellDOTcom

Department Application Center

Honeywell Combustion Controls EMEA

Emmen, The Netherlands

[DavidBoyd]

Geert,

I just sent you a zip archive with the VIs, ctls, etc, plus an English copy of the ELAN manual from Siemens.  Please let me know that you received the attachment OK.  Good luck and let me know if you have problems making the VIs work.

Hope this is helpful!

Dave

[Pinar]

Hi David,

I am a Siemens Ultramat 23 user and I want to communicate it with Rs 485- USB converter via ELAN. I have  Labview 8.5 and as you can see I am new in Labview. Could you please send me your VIs and documants ?

As I read, you are sending these for a long time so I hope you can also give me help.

Sure I will reply you as soon as I take your mail and send feedback 🙂

My e-mail address  pinarcangal@hacettepe.edu.tr

Best regards

[DavidBoyd]

Pinar,

Please excuse the delay, the week before Christmas is a very busy time.  I've sent a zip archive to your email address.  Please confirm that you received it OK.

Best regards,

Dave

[Pinar]

Hi David 

I took your e-mail and the zip files, thanks for every thing 🙂

Best regards 🙂

[ZachAtJasper]

Hi David,

Thank you for providing this software package to the NI community. Could you send the zip file my way? I am in a similar situation - I'd like to pull data into LabView over ELAN from an Oxymat 6.

Thanks for your help,

Zach

[DavidBoyd]

Replied via private email.

[TylerDurden]

Hi David,

sounds good what you have. I need to interface with ULTRAMAT and OXYMAT components but I didn't find any protocol description of the ELAN bus. Could you please send me your VIs or at least the protocol description?

Email: andreas.rzezacz@amc-systeme.de

Thank you very much.

Andreas