04-10-2019 05:06 AM
HI,
I'm attempting to design a ECG signal acquisition and processing vi. My thinking goes like this: the signal picked up by DAQmx should be fed through a Multisim circuit, then its output comes back to labview to be further processed. Can that be done using a Multisim circuit running in a vi? If it's possible, what would you suggest?
04-11-2019 04:56 AM
Hi,
Hope this tutorial is useful: http://zone.ni.com/reference/en-XX/help/375482B-01/multisim/tutorialusingamultisimdesignviinlabview/
04-11-2019 09:22 AM
Hi,
thanks for your reply, I've built a vi to test the function. However it seems that the continious signal output from a waveform generator (like the output of "DAQmx read") couldn't pass through Multisim circuit correctly. Any chance to find what's wrong and modify it? Thanks again.
04-15-2019 02:54 AM
Hi,
I tried your program and managed to get a straight line. Does it mean that you want the control and simulation loop to run continuously until you click halt?