LabVIEW+Nexys4 (FPGA Artix 7)

[Cvillasenor]

Hi every one!! I'm new with LabVIEW, but I have been working with my Nexys 4 for a time, and I want to use like a DAQ, because I don't want to buy one.....there's some way to use it? 

[RavensFan]

Yes.  Plug it in and use it.

You probably have to do some more programming than that.

Do you have a specific question?  Without asking any real questions, it's impossible to be able to help you.

[altenbach]

LabVIEW FPGA only works with NI hardware (with very few exceptions). What are you trying to do?

[DavidPrrs]

Hello Cvillasenor,

As altenbach explained, the Digilent's Nexys 4 board it's not officially supported with LabVIEW FPGA. But you can still use Multisim PLD Designs, I´m not sure what kind of projects you are trying to implement, but may be this can be helpful to you:

Getting Started with Digilent Boards in Multisim:

www.ni.com/white-paper/14871/en/

Digital Comparison Logic:

http://www.ni.com/white-paper/14960/en/a

I hope this help you, best regards.

[Cvillasenor]

Hi, I want to do a DAQ with the FPGA, I want to get some data from a sensor, send it to LabVIEW, get a graph, as I move a servo with the FPGA and set a little memory shift