NI-9361 measuring frequency

[KMC123]

Hello All,

I am trying to read frequencies between 2 Khz and 14Khz with a cDAQ NI-9361 counter timer module. I have started with a help example. Below is a picture of that code. I have attempted several tactics with no success.

I seem to get a similar error all the time. Such as below.

I am only using a referenced single ended input.

Any suggestions?

[cfy2020]

Hi, 

The NI 9361 only supports Dynamic Averaging measurement method, which is a superset of the other measurement methods. 

You will need to set the following property in your VI.

Refer to this link for more info: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA0VU0000002sab0AA&l=en-MY

Regards,

CF

[KMC123 · Accepted solution]

Thanks CF,

I failed to see this property on the DAQmx Create Channel (CI-Frequency).vi.

Appreciate the help! Sometimes, it's sitting right in front of you!

-KMC123