I do have the 32 bit LabVIEW version up and running on the laptop. I downloaded the CAN install file from NI and used it to install the software package. I also looked at MAX and now MAX shows CAN Channels in the Data Neighborhood, which to me tells me that that the CAN package was installed or how else could MAX see it! Actually clicking on the CAN Channel icon in MAX now displays a whole list of CAN things to do like Create a CAN Message and the like. So again MAX says that the install worked! When I go into Program Files/ National Instruments / NI-CAN folder there is a whole assortment of files along with the readme file, and folders all related to CAN, so again it seems like the installer worked! As a matter of fact I also had to install NI_DAQ onto the same laptop, so I went to NI and loaded in the DAQ download file and ran this on the same machine to install DAQ. Same results! There is no DAQ or CAN selection folders in the Measurement I/O pallette or any of the other pallettes! I do need to use both of these tools and am a complete loss of how to fix these two problems with the installation.
