LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Operate PXIe-6570 with LabVIEW

Solved!
Go to solution

I start to use PXIe-6570 in the NI PXIe-1083 chassis.

I saw and followed steps 1 to 5 in the NI guide (Getting Started with PXI Express Multifunction I/O Hardware and LabVIEW - NEW)

After installing NI software, we can see and self-test PXIe-6570 in MAX, as shown in the following Figure.

Mirai1_0-1675229321636.png

 

However, when I searched PXIe-6570 as a target in step 5 of the above guide, LabVIEW did not find the PXIe-6570, as shown in the following Figure.

Mirai1_1-1675229648219.png

I checked the NI forum but did not find a similar discussion.

Could you please advise me on the suggestion to work operate PXIe-6570 with LabVIEW?

 

Best regards,

Mirai1

 

0 Kudos
Message 1 of 8
(2,056 Views)

Hi Mirai,

 


@Mirai1 wrote:

Could you please advise me on the suggestion to work operate PXIe-6570 with LabVIEW?


You don't need to add a "target" to your LabVIEW project, this step is used for Realtime hardware…

 

Instead you should use "NI-Digital" functions within your LabVIEW VI, according to the specs of that hardware!

Did you install the "NI-Digital" driver and do you see its functions in the functions palette?

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
Message 2 of 8
(2,036 Views)

Dear @GerdW,

 

Thank you very much for your advice.

 

1. Did you install the "NI-Digital" driver

-> NI-Digital Pattern Driver is installed as the following figures.

Mirai1_0-1675239638722.png

2. Do you see its functions in the functions palette

Do you mention the content in the following figure? [GETTING STARTED GUIDEPXIe-6570]

Mirai1_1-1675239842048.png

I did not see the NI-Digital Function palette in LabVIEW. Could you please advise me with a figure or guideline on where it should be?

Mirai1_2-1675240294872.png

Mirai1_3-1675240317349.png

Best regards,

Mirai

 

 

 

0 Kudos
Message 3 of 8
(2,022 Views)
Solution
Accepted by Mirai1

Hi Mirai,

 


@Mirai1 wrote:

I did not see the NI-Digital Function palette in LabVIEW. Could you please advise me with a figure or guideline on where it should be?


It should be visible here:

GerdW_0-1675240762327.png

Look in the MeasurementIO palette (as shown) or in InstrumentIO…

 

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
Message 4 of 8
(2,016 Views)
Solution
Accepted by Mirai1

@Mirai1 wrote:

I start to use PXIe-6570 in the NI PXIe-1083 chassis.

I saw and followed steps 1 to 5 in the NI guide (Getting Started with PXI Express Multifunction I/O Hardware and LabVIEW - NEW)

After installing NI software, we can see and self-test PXIe-6570 in MAX, as shown in the following Figure.

Mirai1_0-1675229321636.png

 

However, when I searched PXIe-6570 as a target in step 5 of the above guide, LabVIEW did not find the PXIe-6570, as shown in the following Figure.

Mirai1_1-1675229648219.png

I checked the NI forum but did not find a similar discussion.

Could you please advise me on the suggestion to work operate PXIe-6570 with LabVIEW?

 

Best regards,

Mirai1

 


Foremost, 6570 is an instrument type on its own and NOT a Multifunction I/O HW and hence the article you cited is incorrect.

Once you install NI-Digital driver, you will see this palette in LV,

santo_13_0-1675270202752.png

 

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
Message 5 of 8
(1,998 Views)
Solution
Accepted by Mirai1

Dear @GerdW and @Santhosh,

 

Thank you very much for your guideline in detail with the picture.
I already found the NI-Digital palette in LabVIEW.

 

I would like to have additional related content, so it may be good to continue here.
I start to use an Example for PXIe-6570 in LabVIEW, as shown in the following figure.

Mirai1_0-1675326588900.png

Mirai1_2-1675327053531.png

Could you please advise me on some guidelines for using that examples or a process to work with PXIe-6570 in the correct way?

 

Best regards,
Mirai

0 Kudos
Message 6 of 8
(1,960 Views)
Solution
Accepted by Mirai1

Since you're new to 657x, I would recommend taking up this course - https://www.ni.com/en-us/shop/services/education-services/customer-education-courses/device-testing-...

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
Message 7 of 8
(1,945 Views)

Dear @Santhosh,

 

Thank you very much for your good suggestion of a 657x course.

 

Best regards,

Mirai

0 Kudos
Message 8 of 8
(1,924 Views)