We are trying to run the PXIe-4139 SMU in LabVIEW. We have the PXIe-1073 chasse with the SMU in Slot 3. NI MAX sees both of these items and they are functioning properly. However the DCPower instruemnt drivers do not show up in LabVIEW even though they are already installed on my PC. We are running windows 7, and tried both DCPower 16.0 and 15.2 (I read that 16.0 may have some issues with Windows 7, I am not sure if that was the case). Neither program worked.
What I am struggling with is that the DCPower instruemnt drivers were working properly in LabVIEW previously and have since stopped working. The SMU was giving us a "Code 12: This device cannot find enough resources that it can use". This was solved by allocating 1 MB to the device which allowed it to boot up properly. After that was done the instrument drivers dissapeard from LabVIEW and we cannot get them back.
When I am in LabVIEW I can go to "Tools" then "Instruementation" then to "Find Istrument Drivers" and LabVIEW does not show the PXIe -4139 as a connected device (at the same time NI MAX is showing the PXIe-4139 as connected and working properly).
We are at a loss and would really love any suggestions that you guys have! Thank you for your help.
