Sending commands to RSPD 3303X-E power supply

[Mohkey]

Hi All, 

I have a RSPD 3303X-E power supply that I would like to control through labview. I keep getting an error message as follows: Error-1073807343 occured at VISA Open in file-name.vi

Possible reason(s):

VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.

I am able to send the ID query command using NI MAX but cannot achieve the same in LabVIEW using the NI-VISA library.

I have included a copy of the file for your reference. I will be grateful if you can help me. Perhaps can you provide LabVIEW examples for sending commands to RSPD 3303X-E.

Thank you in advance.

[TCChun · Accepted solution]

Hi,

This link might help: https://forums.ni.com/t5/LabVIEW/VISA-Hex-0xBFFF0011-Insufficient-location-information-or-the/td-p/6...

[Mohkey]

Thank you for the link. I managed to find the specific driver for RSPD 3303X-E in NI library and it works fine now. One can find it under the manufacturing name Siglent Technologies. 

Thanks again.

Mohammad

[Mohkey]

Also wanted to share the file in case someone needs it 😊