Trigger button click programatically after a specified time

[Dennis_Knutson]

Why did you take the capture out of the producer loop. That is NOT what I said to do. You decided to take an additional step that broke the basic capture. 

[nando1988]

How should I pass the image to the snap image screen?

[udka]

We are almost done unless you don't make crazy things like what you just did.
-Why you kept grab outside loop? (keep it inside only)
-Please disconnect the Obtain Queue name input(Please i have been telling the same from beginning why you connected Session out to this terminal??) and give proper name.
-The enqueing is proper and you don't need any wire to be connected from top loop and bottom loop (as already Dennis and myself told).
-Snap image should be connected to Dequeue element output.
-In producer loop, for case structure case selector use output elapsed time and keep it to 500ms.

-For your question, that is the beauty of queues. In enqueue you will send image and receive image at dequeue without any wires.

[nando1988]

I already made the changes you told me to, but I still can't get an image.

Please help me out.

Thanks in advance!

[udka · Accepted solution]

Just two things. The only way to thank in forum is by giving kudoes and making the proper solution as marked solution.
-I didn't mention Wait(ms). i told you to keep elapsed time where is that??connect it to case selector input as suggested.
-Reduce wait(ms) time so that producer loop runs fast.

-You know what it is working for me here with those changes so hopefully V1.8 should be final 😛

[Dennis_Knutson]

You've got a false constant wired to the case statement so the image is not being written to the queue. Are you now getting a continuous stream?

[nando1988]

I reduced the wait time to 1, but I don't understand what do I have to connect to the case selector and where exactly is that.

[udka]

Right click in Block diagram, go to timing group. get Elapsed time there. You have used it in your version1.2.

[nando1988]

To which case selector should I connect the elapsed time to, to the producer or consumer loop case?

[udka]

Producer please 😛