Using labview code of a USB-6003 on a USB-6001

[Luposnipes]

I have recently came across a simple voltage measurement of a generator output. 

The voltage across the positive and negative wires is measured by a USB-6003. I cant use the 6003 for personal use but I can use the code. I want to run the exact same experiment of voltage measurements but dont want to spend an extra 800 dollars on a USB 6003, I would rather spend 400 dollars on a USB-6001. But would the code that was designed for the 6003 run on the 6001 the same? 

It is a simple two wired experiment of voltage graphing. 

[guserwin91]

If nothing much has changed, the same code probably should work if it is not too complex.

Just bear in mind that there is a difference in the sample rate and the bit resolution between the two USBs. So, you might need to modify the sample rate when using USB-6001.

https://www.ni.com/en/shop/data-acquisition/entry-level-usb-daq.html?srsltid=AfmBOoqzOR924_dbQ9HKIfo...