VI crashes labVIEW on opening

[smercurio_fc]

I was able to open the file I uploaded in LabVIEW 10.0f2. Which version of LabVIEW 10 do you have?

[smercurio_fc]

By the way, you may want to review the Knowledge Base article on the Producer-Consumer architecture, which is what you seem to be trying to use.

[RavensFan]

Could one of your subVI's being causing the crash?

I was able to open the VI just fine in 10.0f2, but I had to tell it to ignore the half dozen or so missing subVI's.

[Strokes]

I'm running labVIEW 10.0 Development system.

I just get a white faded out window with a prompt to close labview when I try to open the vi...

[Strokes]

Would it help to upload the vi's that i call from the top-level vi?

[smercurio_fc]

---

@Strokes wrote:

Would it help to upload the vi's that i call from the top-level vi?

---

If that's what's really causing the crash, then yes, it would help.

You may also wish to update your LabVIEW, since there has been a patch released for LabVIEW 10.

[Strokes]

Ok thanks, I'm downloading the patch now as we speak, will upload the sub vi's i'm using...

[Strokes]

Sub vi's called from top-level vi attached below.

I'd be grateful if you could have a look when you've time.

[smercurio_fc]

No problems opening all the VIs in 10.0f2.

[RavensFan]

---

@smercurio_fc wrote:

No problems opening all the VIs in 10.0f2.

---

Same here.  I also went back to the originally posted VI, and had no problems opening that either in 10.0f2.