acquire signals from a monitor

[Sssantosssh]

How does one acquire the physiological signals from a medical monitor? The monitor is a non-national instruments monitor. The patient monitor records ecg, invasive blood pressure from a patient and displays this on a screen. This information is relayed to a central station. Is there a way to obtain these signals and see the ecg and blood pressure waveforms in labview and thus analyse these waveforms. Thank you

[nyc_(is_out_of_here)]

---

@Sssantosssh wrote:

How does one acquire the physiological signals from a medical monitor? The monitor is a non-national instruments monitor. The patient monitor records ecg, invasive blood pressure from a patient and displays this on a screen. This information is relayed to a central station. Is there a way to obtain these signals and see the ecg and blood pressure waveforms in labview and thus analyse these waveforms. Thank you

---

Is reading the manual for this medical monitor something you are not capable of doing?

[Dennis_Knutson]

And if you cannot understand the manual, you should provide the make and model as well as attaching the manual so that someone can read it for you.

Do you understand anything at all about instrument communication - Ethernet, USB, serial? This is nothing related to LabVIEW.

[Sssantosssh]

Thank you for you time and help.

[Sssantosssh]

Thak you for time and help.

[Sssantosssh]

Thank you for your time and help.

[Dennis_Knutson]

With your three thank you's, can we assume you have gotten an answer from the device's documentation?

[Sssantosssh]

Yes. Much appreciated.