LABVIEW 8.5
Hi,
thought my prog would work excellent now, but there´s a little thing i do not really understand and i don´t know what i should change....
I´ve got a 4Hz (GIL) File and a 1Hz (GPS) file. Now it looks like this (Time values are red):
4 Hz Data 1 Hz Data
0.0,-012.96,+000.53,00 1.30, 82800, 49.016503, 8.437605, 13.48, 231.18
0.3,-013.21,+000.30,00 2.30, 82801, 49.016426, 8.437457, 14.01, 231.91
0.5,-013.33,+000.33,00
0.8,-013.51,+000.31,00
1.3,-013.70,+000.26,00 <-----VALUE MISSING (3 values instead of 4)
1.5,-013.81,+000.27,00
1.8,-014.00,+000.21,00
2.0,-014.26,-000.30,00
2.3,-014.39,+000.17,00
2.5,-014.61,+000.23,00
2.8,-014.66,-000.01,00
In this VI i told the prog, to write each row of 1Hz-data as often as 4Hz-data´s rows after comparison of INTEGER TIME VALUES.
After comparison now there is
1,-013.70,+000.26,00, 82800,49.016503, 8.437605, 13.48, 231.18
1,-013.81,+000.27,00, 82800,49.016503, 8.437605, 13.48, 231.18
1,-014.00,+000.21,00, 82800,49.016503, 8.437605, 13.48, 231.18
2,-014.26,-000.30,00, 82801,49.016426, 8.437457, 14.01, 231.91
2,-014.39,+000.17,00, 82801,49.016426, 8.437457, 14.01, 231.91
2,-014.61,+000.23,00, 82801,49.016426, 8.437457, 14.01, 231.91
2,-014.66,-000.01,00, 82801,49.016426, 8.437457, 14.01, 231.91
But there is a mistake. Please take a look at the picture below to understand the mistake, it would be too long to describe it....There is a TimeValue missing in 1Hz Data (it should be 69611,69612,69613 ...but it is 69611,69613 ). Because of that everything that follows is wrong...
Actually i just wanna tell the prog: 1) compare integer values of time, 2) now write each row of 1Hzfile to the corresponding row of 4Hzfile, 3) and if timevalues are missing (maybe from both files?), delete them...
Step 3 is missing...and I must tell you, that someone helped me for this VI, so it´s not really my work :(....i did not really understand all of this, so that i can not do this change on my own after a few tryings...
I would be grateful, if someone could take a look at it
...