for the DAQmx Timing VI in sample clock mode
task in = passed through from DAQmx Create Virtual Channel VI
samples per channel = 1000
sampling mode = finite samples (10178)
sampling rate = 1000
error in = passed through from DAQmx Create Virtual Channel VI
no other inputs!
no error produced in this VI
for the DAQmx Trigger VI in any of the following modes
- start digital edge
- reference digital edge
- start analog edge
- reference analog edge
task in = passed through
edge = rising (10280)
source for digital = PFI0
source for analog = AI0
trigger level = 2.5
pre-trigger samples = 10
no errors produced in this VI
DAQmx Read VI in Analog Wfm 1 Chan NSamp mode
task in = passed through
timeout = -1
no other inputs!
this VI produces error -200278. Cannot use continueous (10123) samples in DAQmx Timing VI.
Trigger signal is always analog even when inputted into a digital channel. Signal may look like a digital signal even though is comes from an analog source. I don't understand what I'm doing wrong.
