help me

[djokovic17]

hi all ,

i have a project where i must integrate a vision  camera into a robot .this robot have to take an counter and to make it in another side so in some cases somes counter may be arrive in a bad position so robot have to take it whatever its position. i think to use VBai to require position but i can't .can you help me to solve this  problem.

Any Help would be appreciated.

best regards

[nyc_(is_out_of_here)]

---

@djokovic17 wrote:

hi all ,

i have a project where i must integrate a vision  camera into a robot .this robot have to take an counter and to make it in another side so in some cases somes counter may be arrive in a bad position so robot have to take it whatever its position. i think to use VBai to require position but i can't .can you help me to solve this  problem.

Any Help would be appreciated.

best regards

---

If you are looking to hire a LabVIEW programmer to do this project, then I suggest you post in the LabVIEW Job Openings forum.

[djokovic17]

i don't need to hire a labview programmer it is a project for me to do 

[jcarmody]

https://decibel.ni.com/content/docs/DOC-40451

Please read this post, then read your original question, then fix it!

[crossrulz]

Help us help you.  What have you tried?  In what way is it not working?  And posting code helps too.

[Brad]

It would be helpful if you provided images or sample code to help understand what you want to accomplish. Are you having trouble finding what you want in the image? Are you having trouble controlling the motors? Be more specific about the counter (i.e. provide images of what it looks like in the good position vs. the bad position).

Thanks,

Brad

[Brad]

It would be helpful if you provided images or sample code to help understand what you want to accomplish. Are you having trouble finding what you want in the image? Are you having trouble controlling the motors? Be more specific about the counter (i.e. provide images of what it looks like in the good position vs. the bad position).

Thanks,

Brad