how to sync pxi-6341 Analog Out to pxi-4304 Analog In

[mysticfree]

I have a PXIe-1082 chassis that contains a PXIe-6341 and a PXI-4304 module.  I'm outputting a sine wave from pxi-6341.Ao.0 channel to the pxi-4304.Ai.0 channel.  The pxi-4304 isn't capturing any signals until about 75 msec later. How do I sync timing between the 2 modules together to stop this loss of data?

(Eventually, I'll be running a digital waveform out of the 6341 and into a device while the 4304 captures analog response of the device. So I'll need to have everything sync'd up.)

Thank you for your help,

Ron

[mysticfree · Accepted solution]

After trying many "tricks" using various DAQmx VIs, I finally found the solution.  I simply had to stagger the "DAQmx Start Task" between the Input and Output as shown in the attached picture.

Hope this helps someone.