is possible connect micrologix 1100 to Labview without the license of Rslinx?

[markayp]

I dont know if this problem can solve here or in the AB forums but i will try here...

I need  connect the MicroLogix 1100 to labview to read some PLC registers, I have all the licenses for  Labview (DSC, ni opc server..etc) but I haven't  license of AllenBradley,it is supposed that i need  rslinx classic to connect the plc but only  i have rslinx lite, then; the use of OPC is restricted to my
There is another possibility to connect them? Help me please 😞

PD. Excuse me my english isn't my native Lenguage... 

[nyc_(is_out_of_here)]

---

@markayp wrote:

I dont know if this problem can solve here or in the AB forums but i will try here...

I need  connect the MicroLogix 1100 to labview to read some PLC registers, I have all the licenses for  Labview (DSC, ni opc server..etc) but I haven't  license of AllenBradley,it is supposed that i need  rslinx classic to connect the plc but only  i have rslinx lite, then; the use of OPC is restricted to my
There is another possibility to connect them? Help me please 😞

PD. Excuse me my english isn't my native Lenguage... 

---

How is this a LabVIEW question?

Talk to Allen-Bradley since they apparently own the rights to the Rslinx software.

[Miraz_Automation]

You can try "Ethernet/IP" protocol, Allen Bradley PLC support this protocol and NI also has a toolkit.

you can also try Modbus over serial or ethernet.

[natasftw]

http://www.ni.com/white-paper/6417/en/ 

[Maur0]

Hello Markayp,

Please find attached the next link with step by step manual regarding how to add a AB PLC to the OPC Server:

http://digital.ni.com/public.nsf/allkb/E8075B687AF86D7B8625756F008037EC?OpenDocument

Let me know if this was usefull.

Mauro ELP AE