sync between continuous sine wave in tx and rx

[nadhira]

hello. I want to synchronize the transmitter and receiver that use continuous sine signal. I can not find the steps to check does the receiver got the real-time signal or got some delay. I will be glad if you can give me some help. thank you

[santo_13]

what tx and rx? you're not providing enough info on what you're trying to achieve.

[nadhira]

I differ the channel gain of channel 0 and channel 1 at the transmitter and change them every 2 seconds (duration can be changed) and I want the receiver to check whether is it channel 0 or channel 1 based on the received power. but I have to synchronize the time between them to make an accurate estimation. here is the picture of Tx and Rx scheme

  

[santo_13]

From the image, you use USRP and hence it is best to move your post to https://forums.ni.com/t5/USRP-Software-Radio/bd-p/500

[nadhira]

Okah thank you very much