ASAM ASAP Standards and LabWindows/CVI

[DieselPower]

I just received a book from ASAM that lists members and products.  There is a page for NI in this book and it lists the following (among others):

NI LabWindows/CVI

Type  ANSI C blah blah

Functionaties   blah blah

ASAM Standards   ASAM MCD-1 CCP, ASAM MCD-1 XCP, ASAM MCD-2 MC (ASAP2/A2L), ASAM MCD-2 NET (FIBEX)

I just searched this board from information on using ASAM (in my case ASAM-3MC), and nothing turned up.  I have written a library in Visual Basic .NET, but I need to port this over to LabWindows CVI.

Just what does NI have to offer for ASAM that works with LabWindows/CVI? 

P.S. My software need only commmunicate with the ASAP server, not the ECU itself.

[jspeedz]

Have you looked into this toolkit?  It looks like this may offer support for ASAM ASAP server communication.

NI ECU Measurement and Calibration Toolkit

https://www.ni.com/en-us/shop/product/ecu-measurement-and-calibration-toolkit.html

[DieselPower]

Thank you for the follow up.

I rolled my own and it's working well.

I am also stuck with LabWindows CVI 2019 because that is the last version that supports real time programming on Pharlap.