In CVI2013 'portable projects' need a rebuild

[Wolfgang]

Hello,

although the below reported bug may be covered by bug id 433769 this may not be obvious so I wanted to share it with you in case you were venturous enough to upgrade to CVI2013...

I work on the same project on two different computers and thus transfer all related files back and forth, i.e. the *.c, *.h, *.ico, *.uir, *.prj and *.cws files. In the past this was working more or less ok, with CVI2013 it fails: if you have a newer UIR file CVI2013 will not use it but the one in the CVI build folder... so one has to use the 'rebuild' menu command, the standard 'build' button is not sufficient, you will see the old UI...

[NeluF]

Hello Wolfgang,

It might be that bug, if you're using CVI2013 with the Patch f1 applied. I will try to reproduce and determine whether the bug covers this use-case.

Thanks!

= Nelu F. || National Instruments.

[NeluF · Accepted solution]

Hello Wolfgang,

I reproduced the issue and it appears that it is indeed related to bug 433769.

Thank you for this information and best regards,

= Nelu F. || National Instruments.

[Wolfgang]

Thanks!