Out of Memory- LabWindows/cvi

[DeBa]

Hello,

I have a problem with labwindows/cvi, when I build and execute my proyect the following error appear:

Out of Memory - An error ocurred while loading debugging information. Is this DLL/EXE was built with an earlier version of Labwindows/cvi you might have to rebuilt it using this version.

If the folder cvibulid.myproyect has not been created yet there is no problem. But if i build my proyect and the I made changes and try to rebuilt, It is it that moment when the error ocurred. So I have to delete the folder every time I made a change If I don´t want the error appear.

I have been working with this version of Labwindos/cvi (7.1) and with this proyect for a long time and i haven´t got any problems, I don´t Know if it could be a build option in the cvi or where could be the problem.

Thank you very much in advance,

[JaimeC]

Hi,

Please read this forum message and check if any of the solutions suggested work in your case,

Let me know,

http://forums.ni.com/ni/board/message?board.id=180&message.id=2647&requireLogin=False

Regards,

[DeBa]

Hi Jaime,

Yes, I tried with the suggestions from the link you show me, but the problem went on.

But now, it is ok. I don´t know why, but when I remove from the proyect one .c file it works correctly.  This file is similar to other used in the proyect without problem, so I have to study the reason. If I find the error I will let you know.

Thank you,

[JaimeC]

It seems like that c file was done in a previous version of CVI and was not build with the 7.1, so that file is giving u problems.

Well, the important thing is that it is working properly now,

[dummy_decoy]

just to make sure: is the 'O' option enabled on this particular file ?

to check this, right click on the file and look at the menu: if it says "disable 'O' option", it means the option is enabled.