Error 0xBFF6001F when using Basler spL4096-70kc and PCIe-1435

[jose.almeda]

Hi all,

I'm using a Basler spL4096-70kc camera and NI PCIe-1435 to acquire images. I cannot make a snap or a grab in MAX. It gave me "Error 0xBFF6001F: Cannot detect recognizable video source"

I don't know what is wrong now. I am using a National Instruments Power over Camera Link MDR to SDR Cable. I connected the Camera Link - Base on PCIe-1435 to the Camera Link - Base of the camera. I have only one cable, so there is not connected the Camera Link – Med/Full on PCIe-1435 to the Camera Link – medium/full of the camera

The camera is connected to 12vdc, and the LED on the back of the camera is orange and no flashing.

          

It's the first time to post a question. Thank you guys very much!

[BruceAmmons]

I would guess the default configuration requires the medium/full cable.  You might be able to find a configuration that only requires one cable, but I don't know.  If you do, use the serial communication to change the camera to the mode you need.

Bruce